Clodbuster run-time

Talk about the Clod Buster, and all other motor on axle trucks here.
clod_happy
Approved Member
Posts: 15
Joined: Thu Aug 19, 2010 12:10 pm

Clodbuster run-time

Post by clod_happy »

Would anyone know what kind of run-time I could expect with different mAh capacity lipo's?

2000mah
3000mah
4000mah
5000mah

I'm running the stock silver cans with an EVX-2, running on short grass and dirt mostly. My clod is used for general running/bashing, no jumping or racing.

Thanks.

CH

User avatar
shadowfocus603
Approved Member
Posts: 323
Joined: Sat Jul 18, 2015 3:45 am
Location: Littleton, NH

Re: Clodbuster run-time

Post by shadowfocus603 »

On mine with the evx2 and 4200 nimh 8.4 batts and revo titans I get about 20 minutes give or take at full throttle on pavement. Grass and dirt will probably lower thatsome. Stock cans though would increase it considerably. I am also running 17 tooth pinions.

User avatar
Sixtys Guy
Approved Member
Posts: 1613
Joined: Wed Feb 13, 2013 1:48 am
Location: Tasmania, Australia

Re: Clodbuster run-time

Post by Sixtys Guy »

It's been a long time since I ran silver cans. I think I was getting around 50 minutes on a 5000mah pack

clod_happy
Approved Member
Posts: 15
Joined: Thu Aug 19, 2010 12:10 pm

Re: Clodbuster run-time

Post by clod_happy »

I forgot to add that I am running 13T pinions. Would anyone else have a general idea of run-time I could expect?

Thanks.