Zac's gallery

A place for you to post pics of your R/C collection.
This is show+tell only, no discussions here please.
Forum rules
One gallery per user.
-Pics and descriptions only.
-Please include links to corresponding build thread of vehicle if applicable.
-Please do not comment/post in galleries!! Follow the links, or send a PM.
Post Reply
Zac_F85
Approved Member
Posts: 552
Joined: Sat Sep 07, 2013 7:41 pm
Location: Clitherall MN

Zac's gallery

Post by Zac_F85 » Mon Nov 25, 2013 2:50 am

Since I am gathering a nice collection up I figured I'd post a few pics of them!

Box art Clod- (still working on the body) - turned into CPE Predator Bigfoot 17 build

All stock axles besides- Robinson Racing steel 13T pinions/Duratrax bearings, Tactic MG high torque servo, Kimbrough 124 saver, EVX-2 ESC, Duratrax 2S 4000mah lipos, Emaxx shocks (stock Emaxx springs, 10wt oil, 3 hole pistons), rear steer lock out, and Traxxas TQ2.4 radio

Image

Image

Image

Image

My ModClod HPI 79 F150

E-Revo EVX-2 ESC, Titan 21T 550 motors, 2 duratrax 2S 4000mah lipo batteries, Traxxas TQ2.4 radio, Losi MG 125oz/in servo's w/ Kimbrough 124 savers, CRP adjustable motor mounts, Traxxas 17T pinions, CPE bearings/stock WB 4 link/ dual shock mounts/ HD aluminum steering links/ vertical servo mounts, ESP lower chassis brace, wheelbase extended to 12", HPI Vorza Flux battery holder, and a Traxxas Emaxx waterproof RX box/shocks (stock clod springs/10wt oil/3 hole pistons)

Image

Only pic of the electronics layout inside the truck..
Image

Tamiya RE-RE SRB Sand Scorcher

Traxxas TQ2.4ghz radio, Duratrax PhotonSpeed2 20T motor, speed tuned gear set (65T/20T), spool, vintage Chrome wheel covers, custom rear skid plate, Futaba S3004 servo mounted in tub using servo uprights, Futaba alloy servo arm, RC4WD shock boots, Great Planes 3200mah 2S thin lipo, Traxxas XL2.5 ESC, scale body, full LED kit w/ light bar, and scratch made interior

Image

Image

Tamiya DT-02 Sand Viper buggy

built for my Nephew when he turns 5-6 years old- box stock w/ Red Cat 2.4ghz radio, Duratrax 72v 3000 NiMH w/ TRX connector, TEU-104 ESC w/ TRX connector, custom painted body painted by me, vintage Proline 2.2's or stock wheels/tires, 19T pinion, silver can 27T motor, bearings, oil shocks, front sway bar, and a Futaba S3003 servo

Image

Image

Image

Tamiya TRF-201 open class 2WD racing buggy

Novak Havok ESC/ Novak SS 13.5T sensored brushless motor, (24T/79T gearing), Traxxas TQ2.4ghz radio, Traxxas 2070 servo, alloy servo arm, TRF aeration shocks (30wt front/50wt rear 2 hole pistons in front 3 hole pistons in rear), Proline Holeshots M3 tires on TRF wheels, Vant 2S 60C/120C 6200mah lipo- custom soldered connections to clear body, Deans connectors, vintage RC10B interior cut to fit

Image

Image

Traxxas Slash stock spec 2WD

Stock Slash 2WD, XL5 ESC, Titan 12T motor broke in using water, Traxxas TQI2.4ghz radio, Kumho licensed tires, Rob MacCachren licensed body, 30wt oil in front shocks/50wt oil in rear shocks, 2070 servo,

Image

Image
2 RC10's, 2 Losi's, 2 B4.1 Worlds, TLT-1 Grave Digger,

Zac_F85
Approved Member
Posts: 552
Joined: Sat Sep 07, 2013 7:41 pm
Location: Clitherall MN

Re: Zac's gallery

Post by Zac_F85 » Sat May 10, 2014 1:37 am

another finished!! VTA legal race car-

Sam Posey's 1970 Dodge Challenger race car - TA05 chassis, Novak ESC/motor, Venom 2S 5000mah lipo, HPI body/tires/wheels, RJ Speed interior, Traxxas radio

Image

Image

Image

Image

Image

Image
2 RC10's, 2 Losi's, 2 B4.1 Worlds, TLT-1 Grave Digger,

Zac_F85
Approved Member
Posts: 552
Joined: Sat Sep 07, 2013 7:41 pm
Location: Clitherall MN

Re: Zac's gallery

Post by Zac_F85 » Sun Dec 28, 2014 8:43 pm

Well sold both clods I had - and built another recently - the one I originally wanted to build - Bear Foot monster truck -

CPE Flashback chassis
CPE dual shock mounts*
CPE scale headers*
CPE stock 4 link*
CPE inner axle braces* (*all not installed yet)
CPE vertical servo mount
CPE steering links
CPE rear steer lock out
CPE Pettibone hubs (Red)
HPI firebolt 15T motors
RR 13t pinions
Traxxas EVX-2 ESC
Traxxas RX box (cut top off to clear plate and resealed)
Axial SCX10 90mm shocks (stock take off's)
Losi MG servo
Axial 2.4 radio

Image
2 RC10's, 2 Losi's, 2 B4.1 Worlds, TLT-1 Grave Digger,

Zac_F85
Approved Member
Posts: 552
Joined: Sat Sep 07, 2013 7:41 pm
Location: Clitherall MN

Re: Zac's gallery

Post by Zac_F85 » Sun Dec 28, 2014 8:45 pm

Did up my other VTA body - 1970 Cuda No.48 Dan Gurney trans AM race car - was mounted on my TA Tamiya TA-05 and still need to do the interior for it (rules specify it has to have an interior)

Image
2 RC10's, 2 Losi's, 2 B4.1 Worlds, TLT-1 Grave Digger,

Zac_F85
Approved Member
Posts: 552
Joined: Sat Sep 07, 2013 7:41 pm
Location: Clitherall MN

Re: Zac's gallery

Post by Zac_F85 » Sun Jun 21, 2015 8:57 pm

latest completion -

TCS Trail Ready SCX10 -

TCS chassis rails, mostly homemade delrin bracing, Integy 45t motor, Traxxas XL5 (subject to change), Hitec 645MG servo, HPI 2.4 radio, unknown 2.2 aluminum beadlocks, Losi crawler tires, TCS 4 link plates, Axial Aluminum shocks w/ 1lb/in springs, and homemade links(subject to change)/LED head/tail lights/exhaust tips/seats/bumpers.

Image

Image

Image

Image
2 RC10's, 2 Losi's, 2 B4.1 Worlds, TLT-1 Grave Digger,

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest