Member R/C Gallery!

A place for you to post pics of your R/C collection.
This is show+tell only, no discussions here please.
Forum rules
One gallery per user.
-Pics and descriptions only.
-Please include links to corresponding build thread of vehicle if applicable.
-Please do not comment/post in galleries!! Follow the links, or send a PM.
rcohio
Regular Member
Posts: 2
Joined: Sat Mar 13, 2010 6:03 am

Re: Member R/C Gallery!

Post by rcohio » Wed Mar 17, 2010 12:40 pm

This is a build off for rc scale 4x4 called Zombipocolypse Buildoff
so this is gonna be my build for the Zombiepocolypse Buildoff. Started with a super clodbuster I got on trade.well the name Mog-apocalypse. Ok so 2 12t thunder tiger motors wired in parallel to a novak super rooster 12t. steering 2 standard futaba servos for now controlled by a rockslide rs10 radio for 4 wheel steering,crab steering or just front or just rear steering. the body I was using in a 2.2 scaler build till this came out unimog body scratch built aluminium bed. Here is what I got so far. started at 1:00pm it's now 11:00pm gonna call it a day for now just got to mount body and put some Zombie slaying equipment on her
Attachments
DSC01079.JPG
DSC01079.JPG (84.8 KiB) Viewed 3696 times
DSC01103.JPG
DSC01103.JPG (74.48 KiB) Viewed 3696 times
DSC01108.JPG
DSC01108.JPG (69.62 KiB) Viewed 3696 times

Z2_Cantilever
Approved Member
Posts: 39
Joined: Mon Jan 21, 2008 2:48 pm

Re: Member R/C Gallery!

Post by Z2_Cantilever » Thu Mar 18, 2010 4:03 am

Image

Image


Image

User avatar
mugen69
Approved Member
Posts: 252
Joined: Thu Aug 12, 2004 6:16 am
Location: Hawaii
Contact:

Re: Member R/C Gallery!

Post by mugen69 » Sat May 07, 2011 8:20 pm

New Era Jugg

Image
Last edited by mugen69 on Wed Dec 07, 2011 5:57 am, edited 1 time in total.

User avatar
Budhatrain
Business Member
Posts: 1785
Joined: Mon Jun 29, 2009 12:52 am
Location: Ohio, USA

Re: Member R/C Gallery!

Post by Budhatrain » Wed Jun 15, 2011 1:01 am

Superman TTR Ripper Pro: dual 4600kv sidewinders

Image
Image
Image

Nightwing CPE Predator Chassis: dual 3800kv sct sidewinders

Image
Image
Image

Batman PRP Berzerzer: dual 6000kv ezrun's

Image
Image
Image

Super Hero's

Image
Image
Need Screws?! Check out Screw Loose Hex Head Hardware here at Clodtalk or go to http://screwloosehardware.com

Team Driver for 2 great companies, visit http://www.cowrc.com and http://store.rc4wd.com/

User avatar
nvxwax
Approved Member
Posts: 118
Joined: Mon Jul 11, 2011 1:19 pm
Location: Helltown Virginia

Re: Member R/C Gallery!

Post by nvxwax » Mon Jul 11, 2011 4:53 pm

Here is one of my clods(well based of the clod parts :)) and My project Mountaineer

Tamiya Mountaineer
ReRe Body
Unknown alloy wheels
Fully polished metal parts (Needs a little cleaning lol)

Image
Image
Image

John Boyer Clod Buster
John Boyer Chassis
Front and Rear Integy Gear Boxes (I need some HR to match the rest of the alloy)
Hot Racing Aluminum Counter Gears
Integy Twin Matched 35 Turn Brushed Motors
Billet Aluminum Ball Bearing Axle Housings And Castor Blocks
Integy Machined Steering Blocks
Gold Anodized Reservoir Shocks
4 Link Suspension
Chrome 'HEMI' Engine Is From A Funline Muscle Machine
ECS Is A HPI / GT / 14.4 VOLT
See's Alloy wheels

Image
Image
̿̿ ̿̿ ̿ ̿'̿'\̵͇̿̿\з=(◣_◢)=ε/̵͇̿̿/'̿'̿ ̿ ̿̿ ̿̿ ̿

MattP
Approved Member
Posts: 66
Joined: Wed Aug 24, 2011 4:37 am
Location: VA

Re: Member R/C Gallery!

Post by MattP » Sun Aug 28, 2011 9:42 pm

Budhatrain wrote:Superman TTR Ripper Pro: dual 4600kv sidewinders

Image
Image
Image

Nightwing CPE Predator Chassis: dual 3800kv sct sidewinders

Image
Image
Image

Batman PRP Berzerzer: dual 6000kv ezrun's

Image
Image
Image

Super Hero's

Image
Image
NICE trucks! Do you have any video of them running? I'm trying to figure out a motor/esc combo for my terminator and would love to see how fast yours are with the different motor setups.

hasher76
Regular Member
Posts: 10
Joined: Sat Sep 03, 2011 5:26 am
Location: NW Burbs Illinois

Re: Member R/C Gallery!

Post by hasher76 » Mon Sep 05, 2011 10:42 pm

Fresh clod picked off ebay
Image
already stripped down, cleaned and awaiting parts.

LST2
Image

Wifes T-Maxx
Image

User avatar
MetalMilitia
Approved Member
Posts: 80
Joined: Wed Sep 28, 2011 6:36 pm
Location: Jackson, NJ

Re: Member R/C Gallery!

Post by MetalMilitia » Thu Sep 29, 2011 7:33 pm

Here's my R/C's as they stand now.

First a highly modified Traxxas Rustler

Image
Image
Image
Image

Next a Brushless Stampede

Image
Image
Image
Image

Close to stock Slash

Image

And last a highly modified Bandit

Image
Image
Image

User avatar
Olbeedo
Approved Member
Posts: 43
Joined: Wed Jun 15, 2011 7:59 pm
Location: York PA

Re: Member R/C Gallery!

Post by Olbeedo » Tue Dec 06, 2011 1:40 am

Well no Clod yet but here's my Maxx..
Attachments
Maxxed Out.jpg
Maxxed Out.jpg (80.13 KiB) Viewed 3081 times
"I GOT CLOD ON THE BRAIN" PLEASE HELP!!!!!!!! MY WIFE.................. ;0)

User avatar
Nathan
Approved Member
Posts: 119
Joined: Thu Mar 15, 2012 1:43 am
Location: Shawnigan Lake B.C. Canada

Re: Member R/C Gallery!

Post by Nathan » Fri Mar 30, 2012 1:21 am

Here is my first clod project.
Z2 chassis
CPE 4 links
CPE shock spacers
CPE rear lock out
CPE steering links (carbon)
evx 2
Titan 21 turns
traxxas shocks
Image
Image
Image

nosyajg
Approved Member
Posts: 324
Joined: Wed Mar 14, 2012 7:30 am

Re: Member R/C Gallery!

Post by nosyajg » Wed Apr 04, 2012 7:32 pm

hi guys...new here, but not new to clods or r/c...i'm usually on rcmt, so some of you might have seen these rides before...most of these were built as clod race trucks...anyway, here's some pics...some pics are dated, and the trucks have changed a little bit from when the pics were taken...


my latest creation is my wraith buster...



Image

Image




then my defiance racing txt...


Image





wraith with clod tires...


Image




clod crawler...


Image




brushless clod with txt chassis...


Image

Image

Image




speed clod project...that'sa 2650 motor in there that i ran 6s in...


Image

Image




my retro clod...


Image




jps chassis clod...chassis i still have, but axles have been used for the txt chassis clod pictured above...


Image




bennett chassis clod...


Image




4-linked jugg...

Image

454chad
Regular Member
Posts: 8
Joined: Fri Aug 24, 2012 9:37 pm
Location: cheboygan mi

Re: Member R/C Gallery!

Post by 454chad » Thu Aug 30, 2012 10:01 pm

Thunder tech tremor Image

User avatar
RcTommy
Regular Member
Posts: 152
Joined: Thu Jul 19, 2012 4:23 am
Location: Stow OH

Re: Member R/C Gallery!

Post by RcTommy » Tue Dec 04, 2012 11:48 pm

Here is my vintage 87 and my CPE Terminator Clods. I also decided to throw in a few of the rest of my collection :mrgreen:.
Attachments
blk 1.jpg
My vintage 1987 Clod Buster
blk 1.jpg (110.72 KiB) Viewed 2642 times
cpe snow.jpg
My CPE Terminator chassis Clod
cpe snow.jpg (53.13 KiB) Viewed 2642 times
blue summit 2.jpg
My Traxxas Summit
blue summit 2.jpg (168.05 KiB) Viewed 2642 times
lun 1.JPG
My Lunchbox
lun 1.JPG (146.83 KiB) Viewed 2642 times
pum 1.JPG
My Midnight Pumpkin
pum 1.JPG (155.18 KiB) Viewed 2642 times

User avatar
KILLER CLOD
Regular Member
Posts: 2
Joined: Sun May 05, 2013 12:54 pm

Re: Member R/C Gallery!

Post by KILLER CLOD » Sun May 05, 2013 3:30 pm

My first Clod build. CPE stock Clod 4 link conversion, CPE vertical servo mounts with CPE steering links, Traxxas T-Maxx shocks with OFNA 1.6 Lbs. springs 30 wt. oil, Tamiya TXT1 wheels, RC4WD Mud Slinger tires with foams, Top Cad roll bar lights, RC4WD Big Boss fender flares, 3Racing operational winch (4th channel), RC4WD tow shackles and hangers, King Kong winch hook, 4 wheel independent steering, hand made front bumper, hand made lower shock mounts, hand made nerf bars, ESP wide ride wideners, hand made bug shield, Level3-rc axle sled guards, Gear Head RC smoked headlight covers, Gear Head RC visor, all the lights are led, operational including front side marker lights, rear tail lights, roll bar lights, headlights, and front parking lights, full ball bearing, 6 tooth pinions with adjustable motor mounts, Traxxas steering servos, Hot Racing servo savers. Thanks for looking.
Attachments
SAM_2655cooling filter resize web.jpg
SAM_2655cooling filter resize web.jpg (189.07 KiB) Viewed 2183 times
100_1869a.jpg
My first Clod build.
100_1869a.jpg (134.99 KiB) Viewed 2470 times
Last edited by KILLER CLOD on Sat Nov 16, 2013 4:18 am, edited 3 times in total.

CowboyClod
Approved Member
Posts: 1153
Joined: Tue Mar 19, 2013 3:18 am
Location: The Animal Farm

Re: Member R/C Gallery!

Post by CowboyClod » Fri May 10, 2013 1:11 am

This is my first retro build BIG.BAD&BOUNCYII built two years ago. It is based off the actual Monster Truck that I seen in person twice and is being restored at this very moment. BullHead Chassis, Cleaned and polished the red chassis. Then cleaned the gear cases and then prime and painted them red with Krylon paint. The steering links hand painted. Homemade bed rails. Metal mending tape applied to door handles and under the bed rails. RC4WD Silverado metal emblems applied. GearHead Clod Buster visor installed and painted black. Homemade spoiler fastened on roof of cab. Homemade flag holders. BB&B waterslide decal applied and sealed off with Tamiya clear coat. Homemade light bar. Homemade middle roll bar fastened on. Automotive pen stripping applied. Clod wheels spray painted bright white with painted detail lug nuts. Back plastic cover made with metal mending tape wrapped around and then fasten on the back of the chassis to cover up the opening. Front grill below front bumper is homemade. BB&B is using a Tamiya ESC. Authenticated with me and wife name.

Image

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest