6WD/6WS Clod Buster - Tiamat

Talk about your custom made one-of-a-kind builds, and also off-beat R/C stuff that you just don't see everyday.
Want to see your truck featured on the home page? Enter our monthly contest in the general discussion section!
Forum rules
Want to see your truck featured on the home page? Enter our monthly contest in the general discussion section!
User avatar
weeb_beano
Regular Member
Posts: 248
Joined: Tue Feb 17, 2004 11:23 pm
Location: NYC

6WD/6WS Clod Buster - Tiamat

Post by weeb_beano » Wed Feb 25, 2004 4:50 am

Some of you may recognize this truck, it's Tiamat, my 6WD/6WS Clod mutant, Tiamat.

Image

Well, the quick overview of the truck and how it is currently setup:
Name: Tiamat
Chassis: 6061 Aluminum L-channel, 1/8" thick. 1/4" thick 6061 staunchions.
Weight: 24.2 lbs.
Front/Mid axle wheelbase: 15"
Mid/rear axle wheelbase: 8"
Total wheelbase: 23"

Image

Top speed: 28MPH
Suspension: Triangulated 4-link on each axle, dampened with HPI Savage long shocks.

Motors: Triple Hacker C50L Brushless (In the USA, C50 E-Maxx).
ESC: Triple JETI Master Car Sport, non BEC
Power: Triple 6-cell stick packs. Additional stick pack for onboard electronics and accessories.

Radio: Futaba T9CAP PCM, surface frequency band (75MHz USA)
Servos: Triple 1/4 scale servos (2X Futaba, 1X Hitec)

Other features:
-Tamiya Big Rig light kit (first generation), with headlights, automatic brakelights, accessory lights, and driver controllable directional blinkers.
-Tamiya Big Rig sound kit (first generation) with engine noise, horn, and backup beep.
-Passenger mounted CMOS camera, broadcasting over UHF, controlled by separate 2CH stick radio and Casio pocket TV.
-Driver's head rotates, driver controllable.
-Onboard bicycle speedometer (Echo F1) with odometer, top speed, other trip features.

Sounds a bit unbelievable i guess, so here's a video: (6.3MB) http://www.beanos.com/~tsoutij/stuff/ti ... hing02.wmv

More pics and videos including all the build up pics from the past are here, in Tiamat's media pile:
http://www.mtsquad.com/phpbb2/viewtopic.php?t=28

Thanks for reading!

BamBam
Regular Member
Posts: 188
Joined: Tue Feb 17, 2004 11:05 pm
Location: Guam U.S.A.

Post by BamBam » Wed Feb 25, 2004 6:49 am

Wow!! That's a beauty!!! :D
Sugar is?

Anonymous

Post by Anonymous » Wed Feb 25, 2004 12:14 pm

that is one nice truck :shock:

mnstrbetle
Approved Member
Posts: 1267
Joined: Thu Feb 19, 2004 1:59 pm
Location: Corning, NY

Post by mnstrbetle » Wed Feb 25, 2004 12:41 pm

Very Cool!!

danferd2002
Regular Member
Posts: 372
Joined: Thu Feb 19, 2004 12:16 am
Location: Glassboro NJ
Contact:

Post by danferd2002 » Wed Feb 25, 2004 8:02 pm

Looks Great

Anonymous

Post by Anonymous » Wed Feb 25, 2004 8:49 pm

fast too? :?:

User avatar
VA_Clod
Approved Member
Posts: 683
Joined: Tue Feb 17, 2004 10:57 pm
Location: Faifield Va.

Post by VA_Clod » Thu Feb 26, 2004 1:46 am

That has to be the wildest Clod built. Three brushless motors :!:

You've put a lot into that truck and it show. Very nice work.

User avatar
TamiyaStock
Regular Member
Posts: 569
Joined: Fri Feb 20, 2004 6:55 am
Location: Valley Forge, PA

Post by TamiyaStock » Thu Feb 26, 2004 12:23 pm

I have been seeing pics/movies of that beauty for years now.

Nasty Monster :D

Weeb, your next 6wd monster should be utilizing the jps twin-motored gearboxes.
R.I.P. RL Burnside November 21, 1926 - September 1, 2005

http://www.fatpossum.com/

User avatar
weeb_beano
Regular Member
Posts: 248
Joined: Tue Feb 17, 2004 11:23 pm
Location: NYC

Post by weeb_beano » Thu Feb 26, 2004 3:47 pm

Wow, thanks for the kind words guys :)
You know... when i saw those trannies come out i basically had to restrain myself. I am highly considering getting at least two (for the rear and mid axles)... but still uncertain. Tiamat is not considered 'done' and is constantly changing so i am not ruling anything out.

User avatar
CM_113
Approved Member
Posts: 1121
Joined: Wed Feb 18, 2004 1:40 am
Location: northcarolina

Post by CM_113 » Fri Feb 27, 2004 2:39 am

OMG WEEB...AWESOME.. its bad sitting there but omg its just wicked sick.AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
" I MAKE My OWN trails,following others is for SHEEP"

offroadford4x4
Approved Member
Posts: 444
Joined: Wed Feb 18, 2004 2:34 am
Location: New Cumberland, Pa

Post by offroadford4x4 » Fri Feb 27, 2004 11:14 pm

Dude that thing is awsome!!! :shock: That vid is of it is realy cool too, althought the music .........

Sweet truck. can I have it? :lol: J/K
Last edited by offroadford4x4 on Wed Oct 06, 2004 2:15 pm, edited 2 times in total.
:confuse:
Stock TLT 4wd/4ws 15x2 Orion
TLT crawler custom chassis & Bronco body
Xtended pede with Tamiya F150 body
Bennett Clod
HPI RS4 Pro3 w/ 53 F100 body
1/6 CXT w/ Nylint crawler tires
65 GTO ProStreet Project / Ghopper chassis

mavrick0
Approved Member
Posts: 286
Joined: Wed Feb 18, 2004 10:15 pm
Location: Ontario Canada
Contact:

Post by mavrick0 » Sat Feb 28, 2004 4:11 am

Hey Weeb did you ever solve the problem of all the BL power blowing out the tranny bearings?
A off roader may be able to jump and run around a track. A on roader may be able to run circles around the road but a monster truck will run over anything and everyone.

User avatar
weeb_beano
Regular Member
Posts: 248
Joined: Tue Feb 17, 2004 11:23 pm
Location: NYC

Post by weeb_beano » Sat Feb 28, 2004 4:39 am

Thanks guys :) Well as for the music, i can definitely say it wasnt me screaming in 'tune', it felt appropriate though :)

The issues with the brushless motors have not been 100% resolved, but i am very close. I replaced the small 8 x 5mm ball bearings with 8 x 8 x 4 needle roller bearings to reduce the stresses on them. I lathed up some reinforcement sleeves for some of the gears, but i did a sloppy job.

I plan on making better fitting reinforcements for the gears, and to re-align the stresses in the driveline about them. There is so much power flowing out of those C50s with just 6 cells it is kind of terrifying. I have tuned the ESCs on the truck since those first videos were shot so expect about a 'free' 5% boost in midrange and top end power.

I'll get some pics when i do a breakdown on the gearcases.

Plus.... Tiamat just got a pile of matched packs, so things are getting interesting in that department. Nothing fancy, but they are matched 2400mAH NiCDs :)

User avatar
andymac0035
Administrator
Posts: 11177
Joined: Mon Mar 29, 2010 9:54 pm
Location: Canaan, NH

Re: 6WD/6WS Clod Buster - Tiamat

Post by andymac0035 » Thu Dec 13, 2012 7:21 am

From the archives!
We were looking at this truck in that other thread, well here it is again!
Truly an awesome custom build!

User avatar
Diamond Dave
Approved Member
Posts: 2246
Joined: Fri Nov 12, 2010 6:24 am
Location: Calgary

Re: 6WD/6WS Clod Buster - Tiamat

Post by Diamond Dave » Sat Dec 15, 2012 6:59 am

It looks so streamlined, but yet not so. Yet it is so fast looking, awesome custom build.

i am not sure how to describe it, slicked back looking from the top, but tough as nails from the ground up...

Sweet either way.

Post Reply
Users browsing this forum: No registered users and 3 guests