New Potential Monster - HSP

For general R/C discussions that do not fit into any of the specific categories below.
New members please stop in here and introduce yourselves.
Want to see your truck featured on the home page? Enter our monthly contest in this forum!
Post Reply
User avatar
Sixtys Guy
Approved Member
Posts: 1533
Joined: Wed Feb 13, 2013 1:48 am
Location: Tasmania, Australia

New Potential Monster - HSP

Post by Sixtys Guy » Wed May 24, 2017 10:32 am

Found this flicking through ebay today... looks like a Wraith style rig. No idea what it would be like, but it looks cool!

"RGT Racing is Please to announce of the releasing the all new RR-4. The vehicle design idea is from the popular full scale Hammer Rock Racing concepts with the full size all plastic tube roll cage to enhance the realistic feels and scale looks. It also has the realistic drivers mounted with decorated cockpit. As for the performance, the vehicle has Multilink suspension and full lock front and rear axle. It also has rigid high aluminum chassis and 2.2 inch high performance tires and wheel set for maximum rock racing performance

Specificstiom:
lenght:480mm Width:280mm
Height:210mm Wheelbase:350mm
Ground clearance:84mm Weight:2800grm
wheel diamete:54mm(2.2inch) Tire diameter:140mm
Radio System:2.4ghz Esc:Waterproof 45A 2in1 esc
Servo:Waterproof 9KG Battery:7.2V 2000mah nimh
Motor:Brushed rc540 Gear ratio:1:48

Low Center Gravity (LCG) design of the transmission gear, electronics and battery tray !! This will provide better crawling performance !
The vehicle has ground clearance up to 84mm for extreme rock crawling performance.
Low Center Gravity battery compartment and Electronics setup !! In order to have all round performance and speed, the new design allowed the hobbyist customize the battery to mounted front or rear without any optional parts."
s-l1600.jpg
s-l1600.jpg (152.4 KiB) Viewed 797 times
s-l1600 (1).jpg
s-l1600 (1).jpg (202.05 KiB) Viewed 797 times
s-l1600 (2).jpg
s-l1600 (2).jpg (187.78 KiB) Viewed 797 times
s-l1600 (3).jpg
s-l1600 (3).jpg (248.59 KiB) Viewed 797 times
s-l1600 (4).jpg
s-l1600 (4).jpg (206.05 KiB) Viewed 797 times
s-l1600 (7).jpg
s-l1600 (7).jpg (216.95 KiB) Viewed 797 times
s-l1600 (5).jpg
s-l1600 (5).jpg (199.69 KiB) Viewed 797 times
s-l1600 (6).jpg
s-l1600 (6).jpg (250.46 KiB) Viewed 797 times
s-l1600 (8).jpg
s-l1600 (8).jpg (235.44 KiB) Viewed 797 times

ratpower396
Approved Member
Posts: 129
Joined: Mon Feb 13, 2017 6:14 pm

Re: New Potential Monster - HSP

Post by ratpower396 » Wed May 24, 2017 11:22 am

wonder what wraith parts if any will fit???

User avatar
Sixtys Guy
Approved Member
Posts: 1533
Joined: Wed Feb 13, 2013 1:48 am
Location: Tasmania, Australia

Re: New Potential Monster - HSP

Post by Sixtys Guy » Wed May 24, 2017 11:59 am

I did wonder that....

ratpower396
Approved Member
Posts: 129
Joined: Mon Feb 13, 2017 6:14 pm

Re: New Potential Monster - HSP

Post by ratpower396 » Wed May 24, 2017 3:03 pm

axles and gearbox look identical to the everest 10 axles and gearbox. If so then axial upgrades will work.

User avatar
andymac0035
Administrator
Posts: 11224
Joined: Mon Mar 29, 2010 9:54 pm
Location: Canaan, NH

Re: New Potential Monster - HSP

Post by andymac0035 » Wed May 24, 2017 3:11 pm

Interesting, looks more in line with the old AX10, but I can't help laughing at the rear driveshaft hanging in pic #3.... :lol:

ratpower396
Approved Member
Posts: 129
Joined: Mon Feb 13, 2017 6:14 pm

Re: New Potential Monster - HSP

Post by ratpower396 » Wed May 24, 2017 6:53 pm

maybe a pre production model...lol

User avatar
Sixtys Guy
Approved Member
Posts: 1533
Joined: Wed Feb 13, 2013 1:48 am
Location: Tasmania, Australia

Re: New Potential Monster - HSP

Post by Sixtys Guy » Wed May 24, 2017 8:15 pm

ratpower396 wrote:
Wed May 24, 2017 3:03 pm
axles and gearbox look identical to the everest 10 axles and gearbox. If so then axial upgrades will work.
That would be promising.

User avatar
Sixtys Guy
Approved Member
Posts: 1533
Joined: Wed Feb 13, 2013 1:48 am
Location: Tasmania, Australia

Re: New Potential Monster - HSP

Post by Sixtys Guy » Wed May 24, 2017 8:16 pm

andymac0035 wrote:
Wed May 24, 2017 3:11 pm
Interesting, looks more in line with the old AX10, but I can't help laughing at the rear driveshaft hanging in pic #3.... :lol:
Good pickup!

darat76
Approved Member
Posts: 78
Joined: Sun Jan 17, 2016 10:53 am

Re: New Potential Monster - HSP

Post by darat76 » Fri May 26, 2017 2:07 pm

andymac0035 wrote:
Wed May 24, 2017 3:11 pm
Interesting, looks more in line with the old AX10, but I can't help laughing at the rear driveshaft hanging in pic #3.... :lol:
that's the newly developed air drive system, true 100% power transfer regardless of angles....

User avatar
The Knight
Approved Member
Posts: 158
Joined: Sat Jul 20, 2013 8:59 am
Location: Good old Germany

Re: New Potential Monster - HSP

Post by The Knight » Fri May 26, 2017 4:38 pm

Thats the evolution of the old HSP pangolin. Same axles I see.
Greets from Germany!

DER ZERSTÖRER - My Clod-TXT Project
The Blackfoot III
My Apocalyptic Volkswagen MK IV - A Mad Max Style Car

User avatar
Sixtys Guy
Approved Member
Posts: 1533
Joined: Wed Feb 13, 2013 1:48 am
Location: Tasmania, Australia

Re: New Potential Monster - HSP

Post by Sixtys Guy » Fri May 26, 2017 11:49 pm

The Knight wrote:
Fri May 26, 2017 4:38 pm
Thats the evolution of the old HSP pangolin. Same axles I see.
I didn't realise that, but yeh looks to be the same running gear. I think that then means it's basically a AX10 copy?

User avatar
The Knight
Approved Member
Posts: 158
Joined: Sat Jul 20, 2013 8:59 am
Location: Good old Germany

Re: New Potential Monster - HSP

Post by The Knight » Sat May 27, 2017 6:05 am

Sixtys Guy wrote:
Fri May 26, 2017 11:49 pm
The Knight wrote:
Fri May 26, 2017 4:38 pm
Thats the evolution of the old HSP pangolin. Same axles I see.
I didn't realise that, but yeh looks to be the same running gear. I think that then means it's basically a AX10 copy?
Yes and no. It's a copy in this way. But parts are not 100% compatible. Axle housing is completly other and the gear in the middle have another gearbox. Some alloy parts fit, others not.... I tried to upgrade an Pangolin gear to an Axial gear and stopped it.
Greets from Germany!

DER ZERSTÖRER - My Clod-TXT Project
The Blackfoot III
My Apocalyptic Volkswagen MK IV - A Mad Max Style Car

Busby
Regular Member
Posts: 1
Joined: Thu Jun 01, 2017 1:19 pm

Re: New Potential Monster - HSP

Post by Busby » Wed Jun 07, 2017 1:40 pm

Sixtys Guy wrote:
Fri May 26, 2017 11:49 pm
The Knight wrote:
Fri May 26, 2017 4:38 pm
Thats the evolution of the old HSP pangolin. Same axles I see.
I didn't realise that, but yeh looks like metadrol the same running gear. I think that then means it's basically a AX10 copy?
I like the looks of this one.
Last edited by Busby on Mon Dec 18, 2017 2:36 pm, edited 2 times in total.

User avatar
Sixtys Guy
Approved Member
Posts: 1533
Joined: Wed Feb 13, 2013 1:48 am
Location: Tasmania, Australia

Re: New Potential Monster - HSP

Post by Sixtys Guy » Thu Jun 08, 2017 2:01 am

Busby wrote:
Wed Jun 07, 2017 1:40 pm
I like the looks of this one.
Yeh i do too, looks like a budget Wraith.

User avatar
Halgar
Administrator
Posts: 13991
Joined: Tue Feb 17, 2004 6:03 am

Re: New Potential Monster - HSP

Post by Halgar » Thu Jun 08, 2017 5:36 am

andymac0035 wrote:
Wed May 24, 2017 3:11 pm
Interesting, looks more in line with the old AX10, but I can't help laughing at the rear driveshaft hanging in pic #3.... :lol:
I saw that too. Those drivelines won't last either, plastic is too soft causing the knuckles wear out extremely fast.
I used to think I was indecisive, but now I'm not so sure.

Post Reply

Who is online

Users browsing this forum: Majestic-12 [Bot] and 31 guests