CVDs.......Please!

Support forum for Thunder Tech Racing.
http://www.thundertechracing.com/

Moderators: Thunder VP, Thunder Tech Pres.

Post Reply
User avatar
SWMS
Business Member
Posts: 602
Joined: Wed Jan 02, 2013 6:23 pm
Location: Frisco, TX

CVDs.......Please!

Post by SWMS » Fri Jul 26, 2013 11:16 pm

Brad,

Giving you a heads up that there are a bunch of us wanting to purchase these. Any idea if these would be available again?

http://www.rcmt.net/forums/showthread.p ... st-thread!

User avatar
Thunder VP
Business Member
Posts: 557
Joined: Wed Feb 18, 2004 6:03 am
Contact:

Re: CVDs.......Please!

Post by Thunder VP » Sat Jul 27, 2013 3:02 am

I am aware of the RCMT thread.
I've told a number of customers that have emailed or PM'd me asking about them that a run was being planned sometime this summer. I still need to get new pricing and see when MIP could fit the order into their production schedule.
We have around 500 of the plastic drive hexes and a few of the 8x12 bearings left from the last run. I need to get a more accurate count of what's left and what needs to be ordered but the plan was to do around 200 pair of CVDs and 50-100 pr of straight axles.
When an estimated availability date is determined, I will certainly get it up on the boards and TTR site.
Brad, Thunder Tech Racing V.P.
http://www.thundertechracing.com

User avatar
Budhatrain
Business Member
Posts: 1785
Joined: Mon Jun 29, 2009 12:52 am
Location: Ohio, USA

Re: CVDs.......Please!

Post by Budhatrain » Sat Jul 27, 2013 3:05 am

Oh baby straight axles!!!!!! YES, I just kissed my wifel
Need Screws?! Check out Screw Loose Hex Head Hardware here at Clodtalk or go to http://screwloosehardware.com

Team Driver for 2 great companies, visit http://www.cowrc.com and http://store.rc4wd.com/

User avatar
SWMS
Business Member
Posts: 602
Joined: Wed Jan 02, 2013 6:23 pm
Location: Frisco, TX

Re: CVDs.......Please!

Post by SWMS » Sat Jul 27, 2013 4:08 am

Good to hear you're aware!

User avatar
charliechristmas58
Approved Member
Posts: 7037
Joined: Sun Sep 17, 2006 11:12 pm
Location: Angleton Texas

Re: CVDs.......Please!

Post by charliechristmas58 » Sat Jul 27, 2013 4:20 am

:D I kissed her too
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming to the Lord,
"Wow, What a ride!"

User avatar
SWMS
Business Member
Posts: 602
Joined: Wed Jan 02, 2013 6:23 pm
Location: Frisco, TX

Re: CVDs.......Please!

Post by SWMS » Sat Jul 27, 2013 4:34 am

charliechristmas58 wrote::D I kissed her too
Uh ho! :shock:

User avatar
charliechristmas58
Approved Member
Posts: 7037
Joined: Sun Sep 17, 2006 11:12 pm
Location: Angleton Texas

Re: CVDs.......Please!

Post by charliechristmas58 » Sat Jul 27, 2013 2:33 pm

I think that was a secret :lol:
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming to the Lord,
"Wow, What a ride!"

User avatar
Kingclod27
Approved Member
Posts: 2191
Joined: Sun Jul 31, 2011 9:13 pm
Location: Richmond, VA

Re: CVDs.......Please!

Post by Kingclod27 » Sat Jul 27, 2013 2:52 pm

Thanks Brad!
The Original Monster Truck

SPEED.......I..AM..SPEED

http://www.youtube.com/user/geeboo27

scClodmaniac
Approved Member
Posts: 49
Joined: Tue Dec 17, 2013 2:00 am
Location: Greenville, South Carolina

Re: CVDs.......Please!

Post by scClodmaniac » Tue Dec 17, 2013 2:00 pm

Does anyone know where I can get a set of these cvd's?
Thanks,
Peter

lanky
Approved Member
Posts: 21
Joined: Tue Aug 13, 2013 10:44 pm

Re: CVDs.......Please!

Post by lanky » Wed Jan 15, 2014 8:53 pm

I need a set bad! I am willing to purchase a few sets if I need to....

Image

Tug4090
Approved Member
Posts: 64
Joined: Sun Jan 19, 2014 2:18 am
Location: Milford, Ohio

Re: CVDs.......Please!

Post by Tug4090 » Sat Feb 15, 2014 11:29 pm

I would buy several sets of CVDs and straight axles!

Simon170
Approved Member
Posts: 54
Joined: Sun Aug 18, 2013 9:07 pm
Location: Essex, UK

Re: CVDs.......Please!

Post by Simon170 » Tue Apr 01, 2014 11:09 pm

I'd have a few sets.
Ripper Pro, Double K, Traxxas Summit, Axial Wraith, scratch built 1/6th scale mega truck, HPI Sprint 2 Flux

User avatar
Minotaur
Approved Member
Posts: 234
Joined: Thu Mar 27, 2014 9:41 pm
Location: Texas

Re: CVDs.......Please!

Post by Minotaur » Mon May 19, 2014 8:56 pm

So, are these in stock? I realize this thread is a year old, but I would take one CVD and one straight axle with 17mm hexes if they were available.

Thanks.

Post Reply
Users browsing this forum: No registered users and 2 guests