Aggressor Steering Shipping Nov 21st.

Support forum for Thunder Tech Racing.
http://www.thundertechracing.com/

Moderators: Thunder Tech Pres., Thunder VP

Post Reply
User avatar
Thunder VP
Business Member
Posts: 557
Joined: Wed Feb 18, 2004 6:03 am
Contact:

Aggressor Steering Shipping Nov 21st.

Post by Thunder VP » Wed Nov 16, 2005 12:09 am

After a little rework we came up with a version that we could get out on the street faster. The kit will sell for $45 and start shipping on Nov. 21st.
Here's a couple preview pics of the new layout.
Image
Image
Image
Image
Image
Brad, Thunder Tech Racing V.P.
http://www.thundertechracing.com

RcK cRwLr
Regular Member
Posts: 1335
Joined: Sat Jun 18, 2005 8:33 am
Location: Just bought 19.2 acres in Colarodo .
Contact:

Post by RcK cRwLr » Wed Nov 16, 2005 12:48 am

A+ job :wink:
ihaveabruiser wrote: As far as all non crawler builds go, they go in chit chat, this is RCCrawler not clod talk :flipoff: :flipoff: :lol: :lol:
MIke
http://www.GSRCRC.com
r(k (rw1r

clodfuji
Approved Member
Posts: 16
Joined: Thu Feb 17, 2005 3:06 pm

Solid Works Users

Post by clodfuji » Tue Nov 22, 2005 7:34 pm

Nice looking model
"You can't lose if you don't play"

User avatar
Shelby VNT
Approved Member
Posts: 2090
Joined: Tue Mar 23, 2004 4:56 pm
Location: Wisconsin
Contact:

Post by Shelby VNT » Wed Dec 14, 2005 6:41 pm

That's very nice! That is a true ackermann steering set-up, correct?

Do you guys have a spacer or washer of some kind that drops into the stock molded in, countersunk hex shape on the knuckles? (where the stock ball ends, which are hexes, slip in and are captured from turning) I think it would be helpful so when you tighten up the steering links to the knuckles you aren't actually compressing the link to the knuckle and causing drag from contact.

How do you guys do it? It looks like you have a spacer of some kind on the top of the knuckles, but what about the bottom?
-Nathan-

Sufferin' Succotash

User avatar
Thunder VP
Business Member
Posts: 557
Joined: Wed Feb 18, 2004 6:03 am
Contact:

Post by Thunder VP » Sun Dec 18, 2005 5:53 am

The Aggressor system corrects the negative ackerman of stock or other forward facing steering setups. The crosslink mounting nuts are captured by molded drop in hex caps. The bottom of the crosslink is countersunk to give a flush screw head and less twisting force on the screw.
Brad, Thunder Tech Racing V.P.
http://www.thundertechracing.com

User avatar
FlashGordon1
Approved Member
Posts: 2503
Joined: Sat Jan 10, 2009 3:21 am
Location: Buffalo,New York

Re: Aggressor Steering Shipping Nov 21st.

Post by FlashGordon1 » Fri Mar 26, 2010 2:45 am

Thunder VP wrote:After a little rework we came up with a version that we could get out on the street faster. The kit will sell for $45 and start shipping on Nov. 21st.
Here's a couple preview pics of the new layout.
Image
Image
Image
Image
Image
Hay I was thinking very hard when I was working today! I am using my setup like the clodzilla chassis. I am using cvd's in the front and straight axles in the rear. Could I use that aggerossor steering on this project of mine?
SOLID AXLE SHAFT MONSTER TRUCK'S
http://www.facebook.com/groups/228629583892520/

User avatar
Thunder VP
Business Member
Posts: 557
Joined: Wed Feb 18, 2004 6:03 am
Contact:

Re: Aggressor Steering Shipping Nov 21st.

Post by Thunder VP » Sat Mar 27, 2010 5:02 am

Upper 4-link bars need to be relocated to the top of the gearbox, but otherwise should work just fine for you.
Brad, Thunder Tech Racing V.P.
http://www.thundertechracing.com

User avatar
FlashGordon1
Approved Member
Posts: 2503
Joined: Sat Jan 10, 2009 3:21 am
Location: Buffalo,New York

Re: Aggressor Steering Shipping Nov 21st.

Post by FlashGordon1 » Sat Mar 27, 2010 11:26 pm

Ok but how can it be done? Because I made my own chassis remember?
SOLID AXLE SHAFT MONSTER TRUCK'S
http://www.facebook.com/groups/228629583892520/

User avatar
Thunder VP
Business Member
Posts: 557
Joined: Wed Feb 18, 2004 6:03 am
Contact:

Re: Aggressor Steering Shipping Nov 21st.

Post by Thunder VP » Sun Mar 28, 2010 2:46 am

For starters you will need an upper link mounting kit. Depending on your current link layout, you may need to move where they mount on the chassis.
Any pics of current set up?
Brad, Thunder Tech Racing V.P.
http://www.thundertechracing.com

User avatar
FlashGordon1
Approved Member
Posts: 2503
Joined: Sat Jan 10, 2009 3:21 am
Location: Buffalo,New York

Re: Aggressor Steering Shipping Nov 21st.

Post by FlashGordon1 » Sun Apr 11, 2010 4:05 pm

Thunder VP wrote:For starters you will need an upper link mounting kit. Depending on your current link layout, you may need to move where they mount on the chassis.
Any pics of current set up?
I will send you a pm of them! and hear is some for everone else
Attachments
Image0079.jpg
Image0079.jpg (8.44 KiB) Viewed 2681 times
Image0078.jpg
Image0078.jpg (7.53 KiB) Viewed 2681 times
Image0077.jpg
Image0077.jpg (5.04 KiB) Viewed 2681 times
Image0076.jpg
Image0076.jpg (5.18 KiB) Viewed 2681 times
Image0075.jpg
Image0075.jpg (5.09 KiB) Viewed 2681 times
SOLID AXLE SHAFT MONSTER TRUCK'S
http://www.facebook.com/groups/228629583892520/

Jeep-Power
Regular Member
Posts: 1
Joined: Thu Mar 04, 2010 4:16 am

Re: Aggressor Steering Shipping Nov 21st.

Post by Jeep-Power » Thu May 31, 2012 3:12 am

these still available?

User avatar
Thunder VP
Business Member
Posts: 557
Joined: Wed Feb 18, 2004 6:03 am
Contact:

Re: Aggressor Steering Shipping Nov 21st.

Post by Thunder VP » Thu May 31, 2012 3:32 am

Yes, and in stock
Brad, Thunder Tech Racing V.P.
http://www.thundertechracing.com

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest