Search found 284 matches

by mavrick0
Thu Apr 19, 2018 1:08 pm
Forum: Off-Topic Chit-Chat
Topic: New Look
Replies: 6
Views: 202

Re: New Look

NorthernNightmare wrote:
Wed Apr 18, 2018 11:36 pm
I dont like the new look that much, too bright I cant read the script... :explosion:
I agree with you which is why I went into my settings and set it back to the way it was before. Just follow the instructions above.
by mavrick0
Tue Jan 17, 2017 12:52 am
Forum: The Paint / Body Shop
Topic: Keeping LEDs in headlight buckets
Replies: 2
Views: 992

Re: Keeping LEDs in headlight buckets

Shoe goo would be your best bet. Hot glue doesn't adhere very well and with the banging around it'll come loose.
by mavrick0
Sun May 08, 2016 12:30 am
Forum: Custom Builds, 6x6's, Tracked Vehicles, and other Oddities
Topic: King Hauler
Replies: 18
Views: 3951

Re: King Hauler

Trust me after your first stock you'll never have another. You'll open a box kit and start hacking right away. lol. Out of the four I've built in the last 2 years the closest one to stock is my first and even at that out of the box it got aluminum wheels, full metal tranny, half fenders, upgraded ax...
by mavrick0
Sun Apr 17, 2016 3:56 pm
Forum: Shaft-Driven Monster Trucks
Topic: Help with these dag gone driveshafts
Replies: 2
Views: 1204

Re: Help with these dag gone driveshafts

Couple of things can be done. First make sure you clean all the threads as good as you can. Any kind of contaminants left behind can cause the Loctite to not set properly. Second if using blue Loctite let it setup for a day or so. If this doesn't help then simply go with red Loctite and this will so...
by mavrick0
Sat Apr 02, 2016 2:40 am
Forum: Motor on Axle Monster Trucks
Topic: cheapest way to get new clod buster axle assemblies
Replies: 5
Views: 982

Re: cheapest way to get new clod buster axle assemblies

At that rate buy a new kit then. By the time you buy all the parts you need you'll be way up there.
by mavrick0
Thu Mar 31, 2016 6:38 pm
Forum: Motor on Axle Monster Trucks
Topic: cheapest way to get new clod buster axle assemblies
Replies: 5
Views: 982

Re: cheapest way to get new clod buster axle assemblies

Either on the b/s/t forum here or on the clodbuster facebook page. I think there's a set of axles on there right now for $80 shipped in the US.
by mavrick0
Thu Mar 03, 2016 11:50 am
Forum: Shaft-Driven Monster Trucks
Topic: SCx10 axles and gear with clod rims, on brushless combo?
Replies: 1
Views: 957

Re: SCx10 axles and gear with clod rims, on brushless combo?

You'll need to upgrade the tranny to all steel gears and you are better using the AR60/wraith axles as they are wider otherwise you'll need some major wideners for the scx10 axles to get some good clearance. Not sure how the stock diff gears will last but run them till the blow and then upgrade to t...
by mavrick0
Sat Feb 06, 2016 2:35 pm
Forum: General R/C Discussion
Topic: Brawler Clod Buster wheels
Replies: 21
Views: 1865

Re: Brawler Clod Buster wheels

The hubs are held on with 2 screws that match the molded ones on the hub.
by mavrick0
Wed Dec 30, 2015 9:40 pm
Forum: Electric Tech
Topic: capacitor keeps going poof
Replies: 7
Views: 1179

Re: capacitor keeps going poof

And really with 2.4ghz technology you don't really need capacitor's anymore on motors. They were to reduce the "noise" made by the brushes arching and could cause interference with the old crystal radios.
by mavrick0
Sun Sep 20, 2015 5:04 am
Forum: Electric Tech
Topic: Most popular connector
Replies: 12
Views: 1397

Re: Most popular connector

I've used deans since they came out and haven't looked back. The powerpoles were nice in their day but I found that over time the spring tension would weaken and cause arcing which then damaged the connectors over time, not to mention they are a tad bulky too. If you do go with deans stay with genui...
by mavrick0
Mon Sep 14, 2015 1:40 pm
Forum: Electric Tech
Topic: EVX-2, 2 x 2S Lipo's & 15T Firebolts (something went poof!!)
Replies: 12
Views: 1311

Re: EVX-2, 2 x 2S Lipo's & 15T Firebolts (something went poo

You over voltaged the motors. The EVX should've been able to handle those motors and power fine but the motors themselves are probably both dead, the only thing is if a motor shorted that could've done in the EVX. A standard 540 can motor is only really designed to handle a max of 8.4v and even that...
by mavrick0
Thu Aug 13, 2015 5:15 pm
Forum: Motor on Axle Monster Trucks
Topic: Clod 3-motor ESC?
Replies: 19
Views: 1494

Re: Clod 3-motor ESC?

Ouch, that one hurts. I would wonder if it even made it in the garbage and didn't end up in the cab of the garbage truck.
by mavrick0
Thu Aug 13, 2015 3:39 pm
Forum: Motor on Axle Monster Trucks
Topic: Clod 3-motor ESC?
Replies: 19
Views: 1494

Re: Clod 3-motor ESC?

Good point, never thought about them having a brushed mode on their ESC's. I've had issue with Castle ESC's, BEC's but never their motors. As for Tekin I've run them since they came out and only ever had one issue and that was way back in the beginning with the old 4 hole, black heatsink ones. And t...
by mavrick0
Thu Aug 13, 2015 3:15 pm
Forum: Motor on Axle Monster Trucks
Topic: Clod 3-motor ESC?
Replies: 19
Views: 1494

Re: Clod 3-motor ESC?

To do something like this, even without speed, is not going to be cheap. You can either watch ebay or some of the facebook groups for people selling used ESC's. I haven't personally used them but I know a few racers that use the Hobbywing 1/8 ESC's in their e-buggies and they swear by them. I know a...